• Product Name：Tensile Tester
• Product Properties：1, After the test machine in place to remove the use of the dressing, and check whether the normal appearance of the test. 2, Such as the need to test large deformation, large deformation device is arranged on the machine and the sliding seat, and before and after the adjustment of position, ensure the device of large deformation of the specimen tracking clamp and a testing machine tensile testing jig jaw in has been on a level surface (Note: large deformation device in the packaging will packaging truss and remove the binder allows large deformation tracking device can be clamped on the flexible and mobile). 3, Open the computer mainframe, display, printer and other packaging, and all plug-ins are installed on the computer, the host and the device is connected by a dedicated USB communication line, the host and the other two jack a large deformation device is connected, the other is connected with the manual operation, manual operation box placed in front of the device is easy to operate.
• Product Application：4, Turn on all power, turn on the host computer and computer power switch, enter the test condition, first double click the test machine drawing icon to enter the test project to choose "interface", such as the need to enter the "tensile test" that is, to enter the tensile test ". 5, Sample loading, using manual operation box or computer mouse, click on "rise" or "drop", the two fixture adjustment to the specimen tension required position (Note: on the machine with a limit protection device, adjust the limit position, ensure the position of the two fixture, lest produce equipment damage). Samples in the fixture is arranged on the clip as vertically as possible and proper tightness, large deformation device tracking clamp in the middle sample marking, General Factory tracking clip has better gauge, two clamping on gauge in 25mm. 6, Click Configure enters the system configuration, view morphing sensor, the displacement and deformation extensometer (requirements for different sample selection, the general elastic body with large deformation, rigid body with position measurement), operation control with automatic fault, whether need automatic return function, select OK to exit. 7, Click on the input data input interface, can fill in the test type, material name, distance and other data, shape selection can be selected according to the characteristics of the sample. Such as plate: the need to enter the width, thickness, bar to enter elongation value of specimen diameter, metal material general input rear OK to exit. 8, When the test before all the preparatory work is completed, the tensile interface on the speed, such as rubber tensile speed, 500mm/min, click the full reset button to press the run button, the test machine into the test state, observe the window data and curve changes until the specimen fracture, test data in the system configuration, select the automatic return to the starting position, the end of the test can be carried out next test. 9, Such as the need to print the test report, click the report into internal report, interface display report parameters and curves, click on the printer can print out the test report, single curve print can be a plurality of curve print together.
• Description：TENSILE TESTER can perform tension, compression, bending, shearing, tearing, peeling and other tests
• Views：
• Browse similar products TESTING MACHINE & OTHERS

TENSILE TESTER

• Product Name：Abrasion Tester
• Product Properties：
• Product Application：
• Description：Abrasion tester is an indispensable test in the lot of Rubber product tests For lot of Rubber products, Attrition performance can influence the service life directly So Rubs Testing is an important problem in Rubber Industry Abrasion tester (GM-1 type) is reference the international standard ISO4649-1985 and GB9867-88 and ZWICK abrasion tester (made in Germany) to development
• Browse similar products TESTING MACHINE & OTHERS